IMA 流動資訊站

K.Takumi 您好 想再請教你兩個問題
1.完成所有步驟後,是不是不要放SIM卡都可以直接進入手機的操作選單?
2.還有哪裡是要注意的?因為我完成步驟後放入SIM卡皆無法搜尋到手機訊號。有時候有訊號,但是無法撥出。是哪裡沒設定好嗎？

謝謝！

仲有好奇怪的事就係....
每次flash(任何starting addresss), 第四個Block(starting addresss+$30000)就停左...

@Kenny兄
會唔係個Driver有問題呢?? (但我係可以Flash到Sony Ericsson機..)

GUI v0.9137287/UNI
standalone version engaged.
Card serial:0000xxxx
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:24
PHONE IS BROWN
Speed:921600
DB2000 only supports 460800,fallback.
OTP status:0 locked:1 CID:24 PAF:0 IMEI:3547210003xxxx
CERT:BROWN
Loader:040622 1339 LLECXC1325712_PRODUCTION P2J
Flash ID check:B00B
Flash props sent ok
Switching to USB...
Phone stays at current interface.
writing D:\Setool\Software\903SH\read_22000000_00100000_35472100XXXXXXX\read_22000000_00100000_35472100XXXXXXX.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:16
Will flash 16 blocks...
verify block error
last blk:22030000,00010000
Elapsed:28 secs.
Open COM port OK
Elapsed:2 secs.