IMA 流動資訊站

kenny, 我回了帶,sorry

http://mobile-files.com/forum/showthrea ... #post73604

New discovery: GDFS and Bluetooth ID problem. With solution!
OK, let say you have 2 K600, K600-A and K600-B for example.

K600-A is GDFS damaged, so you read GDFS from K600-B and write it to K600-A.

Now, two phones shall be using the same GDFS.

But, when you try to pair these 2 K600s with Bluetooth, the phone will hang and reboot. I am not sure about other models, but in my case, the K600 will hang and reboot!

Because these 2 phones are using the same BT ID stored in the GDFS (See attached photo).

With help from Mr. the_laser, we can solve this problem by changing the Bluetooth ID stored in your phone. Use the script below to read the BT ID:

-----cut----
gdfsread:0000002B
-----cut----

You will get a file named "gdfs_var_00_002B_your_imei.txt"

In this file, you will see your BT ID as: gdfswrite:0000002B221EA9070E00

Where "221EA9070E00" is your BT ID. Just change whatever you like and use the Write Script function to write this file back to your phone and you will have a new BT ID.

Of course, the hang & reboot problem will be fixed


PS: All credit goes to Mr. the_laser

thank you for sharing!!

o禁講，係咪我地一般小市民唔可以自己改正番個 BT address o既問題，而係要托番上去個改機處，叫師傅幫我地攪番好呀？