IMA 流動資訊站

我刷机是出现以下的错误
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
Abort all operations.
Elapsed:12 secs.
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
NO valid FLASH CID detected (49)
Speed:460800
err: 45
loader prologue returns invalid status
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:17 secs.
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
NO valid FLASH CID detected (49)
Speed:460800
err: 45
loader prologue returns invalid status
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:103 secs.

我的顺序是
1.在SETOOL中选择 Use TESTPOINT
2.选择SHARP的刷机文件.
3.把刷机线插在903SH的侧面.
4.在SETOOL中按 FLASH
5.出现ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK 后,把TESTPOINT 连接,大约1分钟后,把TESTPOINT 断开,再把电源线插在903SH的充电插口中.
6,出现了以上的错误.
不知道我那里出错了,请大家帮助!!

谢谢!!!!!!!!!

error 45..

Test Point無ground好..我都試過..妳試下揾條峒綫..

我换了一根线,还是不行!

我用的是电源线,不是电池,不知道有没有有问题.
谢谢!

我找到问题了,是第5步,TESTPOINT不要 断开,再把电源线插在903SH的充电插口中.

恭喜曬,妳又搞掂一部機..有無人可以救到我嘅問題丫..
http://www.ima-mobile.com/phpBB2/viewtopic.php?t=23139

Thank you so much..

Peace,
xMAXx