IMA 流動資訊站

最專業之網上流動資訊雜誌
現在的時間是 週六 11月 23, 2024 7:23 am

檢視沒有回覆的主題 | 檢視最近討論的主題


討論區首頁 » 手機及電訊區 » 手機技術區 (只限手機技術問題討論)

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  第 1 頁 (共 1 頁)
  [ 11 篇文章 ] 
  上一個主題 | 下一個主題 
發表人 內容
jun
文章發表於 : 週五 6月 17, 2005 12:15 pm 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
How to fix a 902sh under test program word with Setool?
i tried unlock the phone sucessful but still in test program,and then i press RECOVERY button from setool after the whole process finish my phone cant boot up,anyone know how to fix this problem now???
回頂端
 個人資料  
 
Kenny Li
文章發表於 : 週五 6月 17, 2005 1:18 pm 
離線
全職睇場
頭像

註冊時間: 週一 3月 14, 2005 5:27 pm
文章: 18130
來自: 一個沒有壞人的地方
jun 寫:
How to fix a 902sh under test program word with Setool?
i tried unlock the phone sucessful but still in test program,and then i press RECOVERY button from setool after the whole process finish my phone cant boot up,anyone know how to fix this problem now???


1) Press Menu + Power and turn on your phone.

2) Connect you phone to a GX32 serial cable

3) Use SPST's shdiag and boot the phone into test mode again

4) Press "Quit (Protect, Format)"

5) Your phone will be formated, wait 15 minutes.

6) Done.

_________________
退一步海闊天空!
回頂端
 個人資料  
 
jun
文章發表於 : 週五 6月 17, 2005 3:54 pm 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
Kenny Li 寫:
jun 寫:
How to fix a 902sh under test program word with Setool?
i tried unlock the phone sucessful but still in test program,and then i press RECOVERY button from setool after the whole process finish my phone cant boot up,anyone know how to fix this problem now???


1) Press Menu + Power and turn on your phone.

2) Connect you phone to a GX32 serial cable

3) Use SPST's shdiag and boot the phone into test mode again

4) Press "Quit (Protect, Format)"

5) Your phone will be formated, wait 15 minutes.

6) Done.

i try to run SPST and SHDIAG but it will say operation time out.
how to fix this problem?
i'm using GX30 serial cable and SPST V10
回頂端
 個人資料  
 
Kenny Li
文章發表於 : 週五 6月 17, 2005 4:03 pm 
離線
全職睇場
頭像

註冊時間: 週一 3月 14, 2005 5:27 pm
文章: 18130
來自: 一個沒有壞人的地方
jun 寫:
Kenny Li 寫:
jun 寫:
How to fix a 902sh under test program word with Setool?
i tried unlock the phone sucessful but still in test program,and then i press RECOVERY button from setool after the whole process finish my phone cant boot up,anyone know how to fix this problem now???


1) Press Menu + Power and turn on your phone.

2) Connect you phone to a GX32 serial cable

3) Use SPST's shdiag and boot the phone into test mode again

4) Press "Quit (Protect, Format)"

5) Your phone will be formated, wait 15 minutes.

6) Done.

i try to run SPST and SHDIAG but it will say operation time out.
how to fix this problem?
i'm using GX30 serial cable and SPST V10


1) Full flash the phone again with SPST

OR

2) If you have SPST install, find this file named "scgd_0block_InitFlagOn.ssw" and flash it to the phone. Than turm it on, the phone will format itself.

_________________
退一步海闊天空!
回頂端
 個人資料  
 
jun
文章發表於 : 週五 6月 17, 2005 4:23 pm 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
Kenny Li 寫:
jun 寫:
Kenny Li 寫:
jun 寫:
How to fix a 902sh under test program word with Setool?
i tried unlock the phone sucessful but still in test program,and then i press RECOVERY button from setool after the whole process finish my phone cant boot up,anyone know how to fix this problem now???


1) Press Menu + Power and turn on your phone.

2) Connect you phone to a GX32 serial cable

3) Use SPST's shdiag and boot the phone into test mode again

4) Press "Quit (Protect, Format)"

5) Your phone will be formated, wait 15 minutes.

6) Done.

i try to run SPST and SHDIAG but it will say operation time out.
how to fix this problem?
i'm using GX30 serial cable and SPST V10


1) Full flash the phone again with SPST

OR

2) If you have SPST install, find this file named "scgd_0block_InitFlagOn.ssw" and flash it to the phone. Than turm it on, the phone will format itself.

but now should i use setool or sharp spst to flash?
now my phone can't even power on.
回頂端
 個人資料  
 
Kenny Li
文章發表於 : 週五 6月 17, 2005 4:25 pm 
離線
全職睇場
頭像

註冊時間: 週一 3月 14, 2005 5:27 pm
文章: 18130
來自: 一個沒有壞人的地方
jun 寫:
1) Full flash the phone again with SPST

OR

2) If you have SPST install, find this file named "scgd_0block_InitFlagOn.ssw" and flash it to the phone. Than turm it on, the phone will format itself.

but now should i use setool or sharp spst to flash?
now my phone can't even power on.[/quote]

I will suggest you to use SPST to full flash it.

_________________
退一步海闊天空!


最後由 Kenny Li 於 週五 6月 17, 2005 4:36 pm 編輯，總共編輯了 1 次。

回頂端
 個人資料  
 
jun
文章發表於 : 週五 6月 17, 2005 4:32 pm 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
Kenny Li 寫:
I will suggest you to use SPST to full flash it.

but seems like my SPST doesn't working.
i tried SHdownloader and SHdiag both is not working.
i'm using GX30 com cable,is that correct?
do you have other method to fix this problem?
回頂端
 個人資料  
 
Kenny Li
文章發表於 : 週五 6月 17, 2005 4:40 pm 
離線
全職睇場
頭像

註冊時間: 週一 3月 14, 2005 5:27 pm
文章: 18130
來自: 一個沒有壞人的地方
jun 寫:
Kenny Li 寫:
I will suggest you to use SPST to full flash it.

but seems like my SPST doesn't working.
i tried SHdownloader and SHdiag both is not working.
i'm using GX30 com cable,is that correct?
do you have other method to fix this problem?


If you have setool that can unlock Sharp phones, you shall have a special cable. Use this cable to flash the phone with SPST.

_________________
退一步海闊天空!
回頂端
 個人資料  
 
jun
文章發表於 : 週五 6月 17, 2005 5:47 pm 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
Kenny Li 寫:
jun 寫:
Kenny Li 寫:
I will suggest you to use SPST to full flash it.

but seems like my SPST doesn't working.
i tried SHdownloader and SHdiag both is not working.
i'm using GX30 com cable,is that correct?
do you have other method to fix this problem?


If you have setool that can unlock Sharp phones, you shall have a special cable. Use this cable to flash the phone with SPST.

ok now i know what to do.
but i found got 2 firmware inside the SSW.
1.33H
1.33M
what's the different of this 2 firmware
回頂端
 個人資料  
 
Kenny Li
文章發表於 : 週六 6月 18, 2005 10:50 am 
離線
全職睇場
頭像

註冊時間: 週一 3月 14, 2005 5:27 pm
文章: 18130
來自: 一個沒有壞人的地方
jun 寫:
Kenny Li 寫:
jun 寫:
Kenny Li 寫:
I will suggest you to use SPST to full flash it.

but seems like my SPST doesn't working.
i tried SHdownloader and SHdiag both is not working.
i'm using GX30 com cable,is that correct?
do you have other method to fix this problem?


If you have setool that can unlock Sharp phones, you shall have a special cable. Use this cable to flash the phone with SPST.

ok now i know what to do.
but i found got 2 firmware inside the SSW.
1.33H
1.33M
what's the different of this 2 firmware


1.33H = 902SH firmware
1.33M = 802SH firmware
1.33F = 902SH Ferrari

_________________
退一步海闊天空!
回頂端
 個人資料  
 
jun
文章發表於 : 週六 6月 18, 2005 11:57 am 
離線
新手入場

註冊時間: 週一 4月 18, 2005 6:11 pm
文章: 29
Kenny Li 寫:
jun 寫:
Kenny Li 寫:
jun 寫:
Kenny Li 寫:
I will suggest you to use SPST to full flash it.

but seems like my SPST doesn't working.
i tried SHdownloader and SHdiag both is not working.
i'm using GX30 com cable,is that correct?
do you have other method to fix this problem?


If you have setool that can unlock Sharp phones, you shall have a special cable. Use this cable to flash the phone with SPST.

ok now i know what to do.
but i found got 2 firmware inside the SSW.
1.33H
1.33M
what's the different of this 2 firmware


1.33H = 902SH firmware
1.33M = 802SH firmware
1.33F = 902SH Ferrari

thanks kenny!
btw setool has release the sx813 firmware and i'll try to flash later
thanks alot kenny!
回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  第 1 頁 (共 1 頁)
  [ 11 篇文章 ] 

討論區首頁 » 手機及電訊區 » 手機技術區 (只限手機技術問題討論)

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者：沒有註冊會員 和 66 位訪客

您 不能 在這個版面發表主題
您 不能 在這個版面回覆主題
您 不能 在這個版面編輯您的文章
您 不能 在這個版面刪除您的文章
您 不能 在這個版面上傳附加檔案

搜尋:
前往 :  
cron
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作