Kenny Li 寫:
bgds 寫:
Kenny,我想知道,點解我connect左v800之後,開Cruiser,發現“Conver to Brown"係唔可以選擇的,Why?
你要睇番個 log 先! 可能你之前 flash 完 Brown36 之後已經轉左做 Brown.
如果已經係 Brown, 咁跟住之後程序做就 OK.
Kenny, here is what my cruiser shows while i attach the phone:
Ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 29
Phone color: Red
Trying Red CID29 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 29
Phone hardware initialized OK
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 29
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 29
Secondary certificate color: Red
OSE configuration found.
Analysing GDFS...
Done.
Analyzing RSA protection...
RSA protection is weak.
RSA protection weakness type: PERMANENT
但我想轉個CID做Brown29得時候,就發現個"conver to Brown"button係disable左的。有乜辦法?會唔會同電池有關?