I have no responsibility on flashing the phone deadly or damaging to the phone. Please make sure that you are willing to take the risk om flashing phones.
Based on r6 Vanilla from MoDaCo. Thanks Paul for the greatest effort.
Sorry that I have no device for testing. Please report any bugs in this post, thank you!
Features:
A2SD
Built-in CEDIME
Fixed Contacts
Built in Digital Clock Widget
New boot screen
Removed useless apps from t-mobile and Huawei
Language set to zh_TW as default
Working:
Everything, including Vibrate!!
Not working:
Please report
Known bugs:
Rlease report
Procedures (in English):
1) Download File1 and put it on the root of your sd card
Apply it in the settings of android -> upgrade from sd
2) Then the phone reboots and you're back to 1.5 with a new huawei boot screen
3) After this shut the phone down and enter bootloader mode (turn it on while pressing volume up and red key) and apply the recovery menu and superboot (root)
4) Then you need to wipe everything
I also formatted the SD Card again but I think this is optional
5) Then you apply the 2.1 Vanilla Rom(File2)
6) After this reboot your device (this takes about 3 min... more than I was used to by the older roms) and voila ... you have 2.1 Vanilla with a nice clock in the bar and most important with vibrate working!!
Procedures (in Chinese):
步驟：1. 刷U8220V100R001C125B249SP01(File1)這個包，解壓，關機+音量向上+開機upload），刷了2.1的機友也可直接刷，刷好後開機界面變“HUAWEI"。
2. 連接電腦，藍屏下刷superboot和recovery。刷好後可能觸屏暫時失靈，沒關係，滾輪操作，在卡上放上你要刷的2.1包。
3. 進recovery,wipe：
data/factory reset;
Dalvik-cache;
battery stats;
rotate settings四項。
4. 刷zip刷機包(File2)，完成後卡上有APPTOSD的可以恢復一下分區。
5. 重啟系統，這次時間可能稍久，5、6分鐘左右，OK，done!
Just enjoy it!
Downloads (Download both files):
File 1:
http://www.multiupload.com/WYTUEKC8MH(r8.1)File 2:
http://www.multiupload.com/5IEE10NEQ8(r7.1)File 2:
http://www.4shared.com/file/8uKBLtj1/r71.html
登入
問答集
搜尋
