IMA 流動資訊站

好似成功轉左 CID 但又唔知衰乜，唔俾 Flash 做日版。

GUI v0.91361/UNI
standalone version engaged.
Card serial:0000xxxx
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:36
PHONE IS BROWN
Speed:460800
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3559xxxxxxxxxx
Switching to USB...
CID changed succefully.
Elapsed:8 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:460800
err: 45
rsa prologue NAK
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:1 secs.

_________________
- 吸毒工程系榮譽畢業生 -

咁毒 ??

都唔知衰乜‧‧‧

作佢個屎。

_________________
- 吸毒工程系榮譽畢業生 -

用 "RECOVERY" 之後先 flash !

_________________
退一步海闊天空!

用完 Recovery 出左呢堆野‧‧‧

GUI v0.91361/UNI
standalone version engaged.
Card serial:0000xxxx
Loaded 49 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
Loader:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3559xxxxxxxxxx
CURRENT FLASH FILE CID:36
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Recovery succefull. Reflash phone now
Elapsed:5 secs.

_________________
- 吸毒工程系榮譽畢業生 -

得啦, 可以 flash Main + FS + Complete Phone

_________________
退一步海闊天空!

但係 CID 好似由 29 轉番 36 喎。

_________________
- 吸毒工程系榮譽畢業生 -

Flash 到就唔使理 CID 乜

_________________
退一步海闊天空!

我就係 Flash 唔到‧‧‧



GUI v0.91361/UNI
standalone version engaged.
Card serial:0000xxxx
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:36
PHONE IS BROWN
Speed:460800
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3559xxxxxxxxxx
Switching to USB...
CID changed succefully.
Elapsed:8 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:460800
err: 45
rsa prologue NAK
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:1 secs.
RECOVERY MODE STARTED
Open COM port OK
Loader:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3559xxxxxxxxxx
CURRENT FLASH FILE CID:36
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Recovery succefull. Reflash phone now
Elapsed:5 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:460800
Open COM port OK
ChipID:7100,EMP protocol:0301
CID detected:36
PHONE IS BROWN
Speed:460800
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3559xxxxxxxxxx
Switching to USB...
Flashing MAIN firmware:D:\SETOOL\Sony Ericsson\V802SE\v800R1J_jp_main.cry
CURRENT FLASH FILE CID:29
SSW uses dynamic hash, dynamic hash len is:291
fout_ssw hdr BAD:A9
Elapsed:19 secs.

_________________
- 吸毒工程系榮譽畢業生 -

怕唔怕整死? 唔怕 flash 埋個 erom 先 flash

_________________
退一步海闊天空!

我講講個 STEP 先‧‧‧

唔知岩唔岩！

1. EROM 放 MAIN 然後按 Unlock/Repair
2. GDFS 放 MISC 再按 Unlock/Repair
3. 部野好似變番 CID36，家陣應該咩野都唔好搞就咁起 CID Change 度由 Current 揀 RED29 然後 Flash 一次！

跟住就唔知點做喇，可唔可以指點迷津？

_________________
- 吸毒工程系榮譽畢業生 -

1. EROM 放 Main 然後按 Flash
2. Flash Main + FS + Complete Phone

_________________
退一步海闊天空!

但係呢部係 CID36 Z800i 喎，唔係要轉左 CID29 先 Flash 到咩？

_________________
- 吸毒工程系榮譽畢業生 -

你咪已經轉左囉? 咁先轉 CID

_________________
退一步海闊天空!

我係轉左，但用完 Recovery 就去番 CID36 喇！家陣按 Read Data 都係 CID36。

_________________
- 吸毒工程系榮譽畢業生 -