IMA 流動資訊站

I have few pcs W600 emptyboard phone.
i tried to flash or unlock with setool but with error.
Kenny can you please help?

GUI v0.91371/UNI
standalone version engaged.
Card serial:00000180
Loaded 49 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
Loader:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
CURRENT FLASH FILE CID:36
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Recovery succefull. Reflash phone now
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
CID detected:36
PHONE IS BROWN
Speed:460800
OTP status:0 locked:0 CID:15 PAF:1 IMEI:048XXXXXXXXX
no response,try again.
Elapsed:6 secs.

W600?

部野都未見街，點 Flash / Unlock 呢？

_________________
- 吸毒工程系榮譽畢業生 -

W600?????

如果係 W600, 放低, 放低, 我幫手

_________________
退一步海闊天空!

_________________
- 吸毒工程系榮譽畢業生 -

我都可以幫下手睇架 ^^ 嘻嘻

really no way to fix it?
i stay in canada....

你部 Prototype 黎喎‧‧‧

應該唔駛 Unlock 嘛，我上次玩 Prototype 都冇 Lock 死要用邊個台。

至於 Flash，家陣 SETOOL 都未有 Firmware，何來有得 Flash 呢？

_________________
- 吸毒工程系榮譽畢業生 -

我 check 過, 連 EMEAII 上面都唔見有 W600 firmware, 你去邊搵 W600 firmware 而 setool 又用到架?

W600 喎

_________________
退一步海闊天空!

mine is protoype emptyboard phone.
it doesn't have any thing inside so have to flash it.
i have 1 w600 flashed with k750 firmware but after i tried to flash with w800i firmware it doesn't power on.
please help

我睇你都係送番部機俾 SE‧‧‧

W600 Prototype 版係用 K750i Firmware 頂住先架咋(仲要唔係正統 K750i 果個)，你手痕走去 Flash 佢做 W800i，梗係唔得喇！

_________________
- 吸毒工程系榮譽畢業生 -

or kenny can you teach me how to flash a emptyboard k750?
i try use this method to ressurect my W600

1) Go to the "Empty Tab"

2) Fill the right IMEI of this board

3) Select CID36 for K750i or in your case W600

4) Select in EMPTY tab normal flash file for k750I. Don't forget EROM (Attached)

5) Now press recovery

6) Brown CID36 certificate will be written successfully

7) now, double check IMEI.

8) if all OK, check "WRITE OTP" checkbox, than press flash. Phone will be flashed, gdfs will be filled and phone will be red retail.

_________________
退一步海闊天空!

2) Fill the right IMEI of this board

how to fill the right imei for the board?
this is the log after i follow ur instruction to recovery the phone

RECOVERY MODE STARTED
Open COM port OK
Loader:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
CURRENT FLASH FILE CID:36
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Recovery succefull. Reflash phone now

1) If this is an empty board, it shall have no IMEI, so you have to fill the IMEI you like. Just fill-in any IMEI you like or the IMEI displayed from the log

2) Now, you phone is ready for full flash. After full flash, your phone shall be alive

_________________
退一步海闊天空!

this is wat i follow ur instruction after recovery seems is same...

Open COM port OK
ChipID:8040,EMP protocol:0301
CID detected:36
PHONE IS BROWN
Speed:460800
OTP status:0 locked:0 CID:15 PAF:1 IMEI:048XXXXXXXXXXX
no response,try again.
Elapsed:15 secs.