IMA 流動資訊站

刷了幾十台都沒有出問題,今天見鬼了


GUI v0.9137271/UNI
standalone version engaged.
Card serial:00003
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:460800
OTP status:0 locked:1 CID:36 PAF:1 IMEI:354885006++++ CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Flashing MAIN firmware:E:\Unlock\SEtool\z800\Z800r1ab_main.china.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
SSW loading returns:0
Flashing FS image:E:\Unlock\SEtool\z800\Z800r1ab_fs.apac1.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:93
Will flash 93 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35488500628****
CERT:BROWN
CSloader version:
040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:623 secs.

按照laser的 部皺
1. go to sticky thread about EROMS
2. download db2000erom
3. connect phone and press recovery
4. after recovery procedure completes -
5. press clear names, select in cid change RED29,
6. select EROM in main flash and press FLASH
7. now, press clear names, check "complete" , press flash
8. done, phone is alive

到第六部都沒問題 做了第七部後又出現error


Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:460800
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3548850
CERT:RED
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:460800
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35488
CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Flashing MAIN firmware:E:\Unlock\SEtool\v800\db2000erom_red37.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:4
Will flash 4 blocks...
SSW loading returns:0
CID changed succefully.
Elapsed:27 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:460800
err: 45
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:0 secs.

不是你見鬼, 是 setool 於寫 FS 時, 最後一個動作是會 update GDFS 內的資料, 但失敗, 所以出現上述 error!

其實你是不須要用 erom 的, 因為只是 FS 有問題! 你最後的 error 是 "failed to load CERTLOADERS,try to use RECOVERY", 先退出 setool, 最好再 reboot 一下 PC, 再從新開始一次! 當然, 要留意, 你的 W800 是 RED36, 而不是 RED29

_________________
退一步海闊天空!

reboot computer 後還是 同樣的error log,我的是v800

Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:460800
OTP status:0 locked:1 CID:36 PAF:1 IMEI:354885006.
CERT:RED
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:460800
OTP status:0 locked:1 CID:36 PAF:1 IMEI:354885
CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Flashing MAIN firmware:E:\Unlock\SEtool\z800\Z800r1ab_main.china.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
SSW loading returns:0
Flashing FS image:E:\Unlock\SEtool\z800\Z800r1ab_fs.apac1.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:93
Will flash 93 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35488500628789 CERT:BROWN
CSloader version:
040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:604 secs.

你試一試用最新 version (v0.9137285), 因為你用那個版本已很舊

_________________
退一步海闊天空!

剛剛試了最新的版本,還是一樣的error log

kenny還 有甚麼辦法嗎?

你是在香港?

_________________
退一步海闊天空!

沒有阿
我在紐西蘭

我未親身試過你的情況, 相信很難找到直接方法 ......... 去過 mobile-files 問過沒有?

_________________
退一步海闊天空!

有阿,沒人答我~~~~~~~~~~`